Skip to content
Plug & Pylon

Toyota

The best home charger for a Toyota bZ

Toyota refreshed its electric crossover for 2026, dropped the bZ4X name for bZ, and gave it a native NACS port. Earlier cars use CCS. One J1772 charger serves both.

By Sawyer V. · Published September 10, 2026

A lime-green Toyota crossover in a row of parked cars
Illustrative photo.

How this page is funded: we earn a commission if you buy through our Amazon links, at no extra cost to you. It does not change what we recommend, and we say plainly when the honest answer is to buy nothing. Full disclosure.

bZ4X or bZ: the connector

CarGurus describes the refreshed 2026 Toyota bZ as coming with a native NACS port, and notes that older models of the bZ -- formerly known as the bZ4X -- can buy an adapter for NACS fast-charging networks. At home, the older car's CCS port takes a J1772 charger directly.

What to buy
Your carPortBuy
bZ4X (earlier models)CCS (J1772 for AC)A J1772 Level 2 charger
2026 bZNative NACSA J1772 charger with a J1772-to-NACS adapter, or a NACS unit
Look at your charge port to be sure. Plug types.

Keep it simple

A crossover used for daily driving rarely needs the biggest charger on the shelf. A 32 or 40 A unit replaces a typical day overnight, needs a smaller circuit, and is kinder to a panel near its limit. 32 A vs 40 A vs 48 A.

Chargers that suit a bZ or bZ4X

Ranked for a first home charger. Every row jumps to the full write-up below.

#ProductBest forMax outputPrice
1Grizzl-E ClassicHarsh weather and no app. J1772, 24 ft cable.Harsh weather and no app40 A9.6 kWCheck price on Amazon#ad how we are funded
2Emporia Level 2 EV Charger (Classic)A first charger, hardwired. J1772, 24 ft cable.A first charger, hardwired48 A11.5 kWCheck price on Amazon#ad how we are funded
3ChargePoint Home FlexHomes with an uncertain panel. J1772, 23 ft cable.Homes with an uncertain panel50 A12 kWCheck price on Amazon#ad how we are funded

The chargers in detail

Three J1772 units, each with the case against it.

1. Harsh weather and no app

Grizzl-E Classic

United Chargers · J1772 · 40 A / 9.6 kW · 24 ft cable

A cast-aluminum box with no app, no account and no firmware to update. If you want a charger that behaves like an appliance, this is the one.

What is good

  • Cast aluminum NEMA 4 / IP67 enclosure, built for outdoor mounting
  • No app, no account, no network dependency
  • Amperage is set with physical switches, not software
  • Protections for over-current, over-voltage, ground fault and over-temperature

What is not

  • 40 A ceiling, slower than the 48 A units if your panel can take more
  • No scheduling, so off-peak charging has to be set in the car
  • The cold-flexible 24 ft cable is only on the Extreme Edition
Published specifications for the Grizzl-E Classic
Maximum output40 A / 9.6 kW at 240 V
Adjustable16, 24, 32 or 40 A
ConnectorSAE J1772
Cable24 ft on the Extreme Edition
EnclosureCast aluminum, NEMA 4 / IP67
CertificationUL certified
Warranty3 years

Skip this if: Skip it if you want scheduled charging or energy tracking in an app. The Classic deliberately has neither.

Specifications above are the manufacturer’s published figures. Source: United Chargers, InsideEVs. We have not tested this unit — see how we pick.

Check price on Amazon#ad how we are funded

2. A first charger, hardwired

Emporia Level 2 EV Charger (Classic)

Emporia · J1772 · 48 A / 11.5 kW · 24 ft cable

The safe default for a first home charger: 48 amps hardwired, a genuinely long cable, a NEMA 4 outdoor-rated case, and no subscription attached to the app.

What is good

  • 48 A hardwired is the fastest tier most homes can realistically support
  • 24 ft of cable reaches across a two-car garage without a fight
  • NEMA Type 4 enclosure is rated for outdoor mounting
  • Energy monitoring in the app with no subscription

What is not

  • Drops to 40 A if you use the NEMA 14-50 plug rather than hardwiring
  • The app is the only way to change the amperage setting
Published specifications for the Emporia Level 2 EV Charger (Classic)
Maximum output48 A / 11.5 kW at 240 V (hardwired)
Plug-in output40 A with the NEMA 14-50 plug
ConnectorSAE J1772
Cable24 ft
EnclosureNEMA Type 4, indoor or outdoor
CertificationUL listed, Energy Star
Warranty3 years

Skip this if: Skip it if you want a unit with no app or network connection at all. The Grizzl-E Classic is the simpler machine.

Specifications above are the manufacturer’s published figures. Source: Emporia Energy. We have not tested this unit — see how we pick.

Check price on Amazon#ad how we are funded

3. Homes with an uncertain panel

ChargePoint Home Flex

ChargePoint · J1772 · 50 A / 12 kW · 23 ft cable

The most adjustable unit here. It can be set anywhere from 16 A to 50 A, which makes it the one to buy when you do not yet know what your panel will allow.

What is good

  • Six selectable amperage settings from 16 A to 50 A
  • Sold in both hardwired and NEMA 14-50 versions
  • Rated for indoor or outdoor installation
  • The app is mature and does not require a subscription

What is not

  • 23 ft is a foot shorter than the longest cables in this group
  • The 50 A setting needs a bigger circuit than most panels have spare
Published specifications for the ChargePoint Home Flex
Maximum output50 A / 12 kW at 240 V
Amperage settings16, 24, 32, 40, 48 or 50 A
ConnectorSAE J1772
Cable23 ft
InstallationHardwired or NEMA 14-50
CertificationUL listed, Energy Star
Warranty3 years

Skip this if: Skip it if your circuit is already fixed and you just want the cheapest safe 40 A unit. You are paying for flexibility you will not use.

Specifications above are the manufacturer’s published figures. Source: ChargePoint, ChargePoint. We have not tested this unit — see how we pick.

Check price on Amazon#ad how we are funded

FAQ

Questions people actually ask

Does the Toyota bZ have a NACS port?
The refreshed 2026 bZ does, per published lists. Earlier models, sold as the bZ4X, use CCS; owners can buy an adapter for NACS fast-charging networks.
What home charger do I need for a Toyota bZ4X?
A J1772 Level 2 charger. The bZ4X's CCS port includes a J1772 inlet for AC charging, so it plugs straight in.
Will a J1772 charger work on a 2026 Toyota bZ?
Yes, through a J1772-to-NACS adapter, which also means the same charger still works for a J1772 car in the household.

Sources

Where these numbers come from

  1. All the EVs that use Tesla's NACS plug — CarGurusModel-year NACS status and adapter availability by manufacturer. Read 2026-09-10.
  2. All EVs with a NACS charging port in 2026 — SimpleSwitchPublished list of 2026 native-NACS models, with a note on each. Fetched 2026-09-10.

Read next

Related reading