The best wall mount for a portable EV charger

How this page is funded: we earn a commission if you buy through our Amazon links, at no extra cost to you. It does not change what we recommend, and we say plainly when the honest answer is to buy nothing. Full disclosure.

The verdict: if you are buying one thing, buy the BARKAN 32-inch cable arm, because it is the only item in this category that addresses all three parts -- the box gets a wall holder that comes in the box, the cable runs inside the arm, and the adjustable handle holds the connector. If you would rather spend twenty dollars than seventy, a holster dock and a J-hook does most of the job and is the pick on the cable organizer page for the same reason. If the charger lives outside or somewhere other people walk past, a lockable enclosure is the right answer and the weather and the theft problem go away together.

Portable mount picks

Ranked for a first home charger. Every row jumps to the full write-up below.

#	Product	Best for	Max output	Price
1	BARKAN 32 in / 80 cm protective EV charging cable wall arm (EV80WM)A single parking space, charger on the same wall. Cable accessory.	A single parking space, charger on the same wall	—	$63.92 · View on Amazon#ad how we are funded · price as of November 8, 2026
2	LLectron J1772 charger holder setPortable chargers. J1772.	Portable chargers	—
3	Lectron J1772 holster dock and J-hookJ1772 connectors. J1772.	J1772 connectors	—	$19.99 · View on Amazon#ad how we are funded · price as of November 8, 2026
4	Lectron Tesla NACS holster dock and J-hookTesla connectors. NACS.	Tesla connectors	—	$19.99 · View on Amazon#ad how we are funded · price as of November 8, 2026
5	VIVO Wall-Mounted EV Charger Protective Box (MOUNT-EVCG1)An outdoor or shared charger you want locked. Panel-mounted.	An outdoor or shared charger you want locked	—	$149.99 · View on Amazon#ad how we are funded · price as of November 8, 2026

Three parts, three jobs

Why the plug is the thing to protect

A plug-in charger -- portable or not -- puts its entire mechanical load on a receptacle that was engineered to hold a lamp cord. Add several pounds of control box and twenty-five feet of cable pulling sideways, and the blades work in the contacts every time the cable moves. This site's standing position is that the receptacle behind a plug-in charger is the best twenty dollars in the whole project: see the best NEMA 14-50 outlet for the 240 V case and the best outlet for Level 1 charging for the 120 V one. Supporting the box is the other half of the same fix, and it costs less.

There is a related decision worth naming. If the portable unit is permanently living on one wall, plugged into one receptacle, mounted on a bracket with the cable on a hook -- it has become a wall charger with a plug on it. That is a perfectly good setup, and it is also the moment to read portable versus wall charger and hardwired versus plug-in, because the reasons to own a portable are travel and no-install, and you may have stopped using either.

Match the dock to the connector

Holster docks are connector-specific. A J1772 connector is the larger round one with a flat top; a NACS connector is the small sleek one. The dock for one does not hold the other, and this is the single most common returned-accessory story in the category. If you are not sure which you have, plug types explained has pictures of both, and EV charging adapters covers the case where the household has one of each.

The five picks

1. A single parking space, charger on the same wall

BARKAN 32 in / 80 cm protective EV charging cable wall arm (EV80WM)

BARKAN · Cable accessory

The cheapest honest answer to a cable on the floor: a zinc-coated arm that lifts the cable above head height, hides most of it inside the arm, and comes with a wall holder for a portable charger's control box. BARKAN publishes the cable diameter it fits, which is the number that decides whether any of this works.

What is good

• +Publishes the cable diameter and cable weight it is rated for -- almost nothing in this category does
• +Routes most of the cable inside the arm, so it is a conduit rather than just a hook
• +Ships with a wall holder for a portable charger's control box, usually a separate purchase
• +5-year warranty, and the coating is specified for rain and sun rather than described as weatherproof
• +Adjustable handle doubles as the handle store and the cable coil

What is not

• −0.7 in diameter limit rules out the thickest 48 A cables -- measure yours first
• −11 lb cable limit is a real ceiling on a long heavy cord
• −Needs a solid wall or beam; drywall alone is not on BARKAN's list
• −A post adapter for metal poles is sold separately
• −At 32 inches it is the short one; a car parked wide needs the longer arm

Published specifications for the BARKAN 32 in / 80 cm protective EV charging cable wall arm (EV80WM)

Maximum distance from the wall	32 in / 80 cm
Fits cable diameter	Up to 0.7 in / 18 mm
Cable weight supported	11 lb / 5 kg; safety tested at 44 lb / 20 kg
Recommended installation height	91 in / 230 cm
Mounting surfaces	Block, concrete, wooden beams, or a square wooden post at least 4 in / 10 cm
Weather	Indoor and outdoor; zinc coating plus UV additives
In the box	Disassembled arm, adjustable handle, strap, a wall holder for the control box, screws and anchors
Warranty	5 years
Color	Black

Skip this if: Skip it if your cable is thicker than 0.7 in or heavier than 11 lb -- BARKAN publishes both limits. Skip this length if the car parks more than a yard out from the wall; the 63-inch arm exists for that.

Specifications above are the manufacturer’s published figures. Source: BARKAN Mounts. We have not tested this unit — see how we pick.

$63.92 · View on Amazon#ad how we are funded · price as of November 8, 2026

2. Portable chargers

L

Lectron J1772 charger holder set

Lectron · J1772

A connector dock plus an adjustable holder that clamps a portable charger's control box to the wall -- most of what a wall unit gives you, for a portable that lives on a 14-50.

What is good

• +Holds the portable's control box as well as the connector
• +Adjustable arms fit different box widths
• +Keeps a portable off the floor between trips

What is not

• −J1772 only
• −Plastic rather than steel
• −Only useful if the portable stays mounted at home

Published specifications for the Lectron J1772 charger holder set

Fits	J1772 portable chargers, Level 1 or 2
Box holder	Adjustable side arms to fit the control box
Material	ABS plastic
In the box	Box holder, connector holder, 7 mounting screws

Skip this if: Skip it if you have a wall-mounted charger with its own holster; this set is built around a portable's control box.

Specifications above are the manufacturer’s published figures. Source: Lectron. We have not tested this unit — see how we pick.

3. J1772 connectors

Lectron J1772 holster dock and J-hook

Lectron · J1772

A steel dock that latches a J1772 connector and a hook for the cable, rated by Lectron for indoor and outdoor use. Fits all J1772 connectors.

What is good

• +Anti-corrosive steel rather than plastic
• +Latches the connector so it stays put
• +Hook keeps the cable off the ground

What is not

• −J1772 only
• −No holder for a portable's control box -- see the holder set
• −Check your charger does not already have a holster

Published specifications for the Lectron J1772 holster dock and J-hook

Fits	All J1772 connectors
Material	Anti-corrosive steel
Use	Indoor or outdoor
In the box	Dock and J-hook, with mounting hardware

Skip this if: Skip it if your connector is a Tesla (NACS) -- this dock is shaped for J1772.

Specifications above are the manufacturer’s published figures. Source: Lectron. We have not tested this unit — see how we pick.

$19.99 · View on Amazon#ad how we are funded · price as of November 8, 2026

4. Tesla connectors

Lectron Tesla NACS holster dock and J-hook

Lectron · NACS

A dock that grips a Tesla connector and a J-hook that keeps the cable off the floor, sold for indoor and outdoor mounting. Made for Tesla's Mobile Connector and Wall Connector.

What is good

• +Grips the connector so it cannot drop to the floor
• +J-hook keeps the cable off the ground, preventing kinks
• +Sold for indoor and outdoor mounting

What is not

• −Tesla (NACS) connectors only
• −Material is not stated beyond weather-resistant
• −Check your charger does not already have a holster

Published specifications for the Lectron Tesla NACS holster dock and J-hook

Fits	Tesla Mobile Connector and Wall Connector
Use	Indoor or outdoor
In the box	Dock, J-hook, 4 screws, 4 wall plugs

Skip this if: Skip it if your charger has a J1772 connector -- NACS and J1772 docks are different shapes.

Specifications above are the manufacturer’s published figures. Source: Lectron. We have not tested this unit — see how we pick.

$19.99 · View on Amazon#ad how we are funded · price as of November 8, 2026

5. An outdoor or shared charger you want locked

VIVO Wall-Mounted EV Charger Protective Box (MOUNT-EVCG1)

VIVO · Panel-mounted

A lockable steel enclosure for a wall-mounted charger, with a tempered glass front so you can still read the status light and two side vents so it does not cook. The honest use case is an exposed or shared parking spot.

What is good

• +Padlock and key, which is the only published anti-access feature in this category on the site
• +Tempered glass front means you can read the charger's status without unlocking it
• +Two side vents, so it is not a sealed box around a device that makes heat
• +Steel with an outdoor powder-coated finish, mountable to stud or masonry
• +3-year warranty and a published specification table

What is not

• −Measure first: a 19.7 x 9.8 x 27.6 in box does not fit every charger, especially 80 A units
• −27.5 lb of enclosure on the wall before the charger goes in it
• −VIVO publishes no IP or NEMA rating for the box, so weatherproofing is not a claim we can check
• −A padlock deters opportunists; it is not a serious security device
• −Pointless in a locked garage

Published specifications for the VIVO Wall-Mounted EV Charger Protective Box (MOUNT-EVCG1)

Product dimensions	19.7 x 9.8 x 27.6 in
Accessory rail	5.9 x 1.4 in
Item weight	27.5 lb
Material	Tempered glass and steel, outdoor powder-coated finish
Front panel	Tempered glass, so charging status is readable with the door shut
Ventilation	Two side vents
Security	Safety padlock and key included
Mounting	Wood stud, or concrete and brick
Compatibility	Most brands of wall-mounted EV charger
Warranty	3 years
SKU	MOUNT-EVCG1

Skip this if: Skip it if your charger is in a locked garage -- it is solving access and weather problems you do not have. Check your charger fits the internal dimensions first.

Specifications above are the manufacturer’s published figures. Source: VIVO. We have not tested this unit — see how we pick.

$149.99 · View on Amazon#ad how we are funded · price as of November 8, 2026

Mounting notes

• Find something solid. BARKAN lists block, concrete, wooden beams or a square wooden post of at least 4 in. A holster into drywall anchors is fine for a connector; a control box is not.
• Leave slack at the plug. The cable should loop gently out of the box, never pull. A supported box with a taut plug is still a plug under load.
• Height. Put the connector at hand height and the box above the floor line. BARKAN's recommended arm height is 91 in / 230 cm, which is above a door head in most garages.
• Outdoors. A unit rated for outdoor use still benefits from being up off the slab. A lockable enclosure adds weather and security at once -- see the best EV charger pedestals and mounts for the enclosure we rank.
• Do not drill until the car is parked where it normally parks. Reach is decided by the car, not by the wall.